|
HaloClip light
In a single move, the clip-on lamp attaches neatly, easily and rigidly
to the Concert stand tray. Like all RAT Music Stand lights, it is
designed to throw the maximum amount of light on the score, with
the least possible spillage.
- Uses a mains voltage tungsten halogen bulb commonly available
from RAT Music Stands and electrical stores
- Precision curved reflector gives excellent illumination with
little light spillage
- Double insulated for safety
- Very slim housing does not obstruct view of conductor
- Fitted with 3m of cable
- Unique design of spring clip locks rigidly to the tray without
the need for a thumb screw.
Twin HaloClip light
In a single move, the clip-on lamp attaches neatly, easily and rigidly
to the Concert stand tray. Like all RAT Music Stand lamps, it is
designed to throw the maximum amount of light on the score, with
the absolute minimum of spillage.
- Uses two low voltage tungsten halogen bulbs commonly available
from RAT Music Stands and electrical stores
- Low voltage bulbs give even better light control than the mains
voltage bulbs, have a longer life and lower replacement costs.
- Transformer is built into the housing
- Precision curved reflector and special light guide give excellent
illumination with minimum light spillage
- Double insulated for safety
- Very slim housing does not obstruct view of conductor
- Fitted with 3m of cable
- Unique design of spring clip locks rigidly to the tray without
the need for a thumb screw.
ConcertLight
The cordless, rechargeable clip-on lamp attaches securely to the
Jazz, Concert and Performer stand trays.
- Lightweight and compact
- 3.5 hours of top quality illumination between charges
- Optional long life battery gives 6 hours between charges
- Lamp can be powered by the rechargeable battery or directly
from the mains using the charger unit.
- NiMH battery packs can be recharged at any time
- A full charge takes about 3.5 hours
- The lamp is supplied in a convenient carry
case, complete
with one battery pack and charger.
LEDclip Light
The best lamp on any music stand, anywhere! Six of the latest high
powered LEDs give very bright and even illumination of the score
with less light spillage than any other light we know of. The finger-slim,
aluminium housing allows the musician the best possible view of
the conductor.
The LEDs are virtually indestructable and never wear out, so you
will never again have to change a bulb in the middle of a performance.
Furthermore, over the lifetime of the product the absence of bulb
replacements costs will easily repay your additional initial investment
in this state of the art music stand light.
The LEDlight can be powered by any of three interchangeable power
supplies:
- plug top power supply
- dimmable power supply with IDS
- rechargeable battery pack
The plug top power supply is ideal for individual stands
which do not need to be dimmed.
The dimmable power supply with IDS is perfect for theatre
use where many stands can be interconnected and dimmed using a standard
theatre dimmer:
- the unit locks quickly and rigidly to the base of the stand
- can be dimmed exactly like an incandescent lamp
- it incorporates IEC inlet and outlet sockets which enable each
stand to be connected to the previous one in a daisychain
- a pigtail ensures that the power cords leave the stand at ground
level, and that pulling on a power cord cannot pull it from its
socket.
The rechargeable battery pack is ideal for open air venues
(no power supply required), stage and TV (no messy wiring), and
inaccessible spots (no need to arrange wiring for a single stand):
- a choice of removable battery packs give over 4 hours or 9 hours
of continuous light between charges
- when the battery runs down, it can either be replaced by a fresh
battery or recharged with the plug top fast charger
- the charging station recharges up to 10 batteries simultaneously
- batteries are recharged in under 90 minutes for the 4 hour battery
pack, and 3 hours for the 9 hour battery pack
- Optional radio control: a radio receiver module can be fitted
to each stand enabling a stand or group of stands to be controlled
remotely. The transmitter module can operate as a stand alone
cordless unit for ON/OFF control only, or it can be plugged into
your lighting control system where it will operate as one DMX
channel with full dimming control.
|