Lampade “Opera”

Each Opera stand incorporates a precision engineered socket at the top of the stem. A choice of music stand lights can be fitted to this socket and locked in position by half a turn of an allen key.

Single HaloLight
The Single HaloLight is designed to throw the maximum amount of light on the score, with the least possible spillage.

• Uses a mains voltage tungsten halogen bulb commonly available from RAT Music Stands and electrical stores
• Precision curved reflector gives excellent illumination with little light spillage
• Double insulated for safety
• Very slim housing does not obstruct view of conductor
• A coiled cable from the lamp to ground level enables the stand height to be adjusted without detaching the cable from its hook at the base of the stand
• Straight cable from the base of the stand reaches a further 3m

Twin HaloLight
No musician has ever said this lamp is not bright enough, and yet the superb cut off ensures that the light falls on the music score and nowhere else. The slim housing allows the musician the best possible view of the conductor. The halogen bulbs produce white light and have a very long life.

• Lampadine 2 x 20 W o 2 x 10 W
• Eccellente taglio di luce
• Illuminazione eccellente
• Il design molto fine non ostruisce la visuale del direttore
• Lampadine di lunga durata
• A doppio isolamento
• Il basso consumo energetico causa anche meno problemi di temperatura nella fossa d'orchestra
• Adatta a 4,6m (15') di cavo sufficienti per raggiungere la base del leggio; sono poi disponibili altri 3m

IEC Daisychaining System

• Connette leggii adiacenti tramite cavi di estensione standard IEC
• Il fusibile della lampada e l’interruttore sono indipendenti dalla presa di corrente
• Il segnalatore neon indica se l’elettricità raggiunge la scatola di giunzione IDS
• La scatola di giunzione è facilmente removibile qualora il leggio venga richiesto senza la sua lampada
• I ganci del cavo assicurano che le spine non vengano rimosse accidentalmente sganciandosi
• Alimentato tramite 2 m (6’ 6”) o 3m (9’ 9”) di cavo estensibile da ordinare

LEDlight
The best lamp on any music stand, anywhere! Six of the latest high powered LEDs give very bright and even illumination of the score with less light spillage than any other light we know of. The finger-slim, aluminium housing allows the musician the best possible view of the conductor.

The LEDs are virtually indestructable and never wear out, so you will never again have to change a bulb in the middle of a performance. Furthermore, over the lifetime of the product the absence of bulb replacements costs will easily repay your additional initial investment in this state of the art music stand light.

The LEDlight can be powered by any of three interchangeable power supplies:

• plug top power supply
• dimmable power supply with IDS
• rechargeable battery pack

The plug top power supply is ideal for individual stands which do not need to be dimmed.

The dimmable power supply with IDS is perfect for theatre use where many stands can be interconnected and dimmed using a standard theatre dimmer:

• the unit locks quickly and rigidly to the base of the stand
• can be dimmed exactly like an incandescent lamp
• it incorporates IEC inlet and outlet sockets which enable each stand to be connected to the previous one in a daisychain
• a pigtail ensures that the power cords leave the stand at ground level, and that pulling on a power cord cannot pull it from its socket.

The rechargeable battery pack is ideal for open air venues (no power supply required), stage and TV (no messy wiring), and inaccessible spots (no need to arrange wiring for a single stand):

• removable battery pack gives over 5 hours of continuous light between charges, and over 15 hours on the low power setting.
• when the battery runs down, it can either be replaced by a fresh battery or recharged in under 1.5 hours with the plug top charger
• the charging station recharges up to 10 batteries simultaneously in 90 minutes
• Optional radio control: a radio receiver module can be fitted to each stand enabling a stand or group of stands to be controlled remotely. The transmitter module can operate as a stand alone cordless unit for ON/OFF control only, or it can be plugged into your lighting control system where it will operate as one DMX channel with full dimming control .