+44 (0)20 8741 4804


Receive a quote

Twin Head Trio Clip-on Light

Twin Head Trio Clip-on Light

Get a quote
  • 24V

The best lamp on any music stand anywhere! The Trio range gives more light, of better quality and with greater control than any other music stand light on the planet. The Trio range is the face of a complete music stand lighting system which provides every conceivable option for control and power delivery. The Twin head Trio places two small lamp heads above the score, with a space between them to allow the musician a completely unobstructed view of the conductor.


Product code:


Visit the Gallery

Download specification sheet


Universal mounting

The base of the lamp can be clamped rigidly to the back of most music trays using two neat but powerful nylon thumb screws.

High Quality LED's

32 state of the art low voltage LEDs give exceptionally bright and even illumination over the entire score. LEDs are virtually indestructible and never wear out, so you will never again have to change a bulb in the middle of a performance.

Colour and Brightness Control

Colour temperature of the light can be varied between 2700K and 4000K. Brightness and colour temperature can be controlled by the musician (using the thumbwheels on the lamp), or by the lighting desk. Control by the lighting desk has priority over control by the musician.

Low Voltage

Reduced power consumption and consequent reduction in air conditioning means that using this light is environmentally friendly. Over the lifetime of the product, lower electricity bills and the absence of bulb replacements costs will repay your initial investment. The light runs off a 24V power supply for electrical safety.

Mains or Battery Powered

Can be powered by batteries, or by mains power using the appropriate PSU. When powered by batteries, the light progressively warns the user when the battery is running low, giving plenty of time to change the battery without plunging the musician into darkness. When powered by the PSU, lights can be connected to the PSU in a star configuration or in a daisychain.

XLR Daisychaining

When powered by the PSU, lights can be connected to the PSU in a star configuration or in a daisychain.

Radio Control

With the optional Radio receiver, each light can be assigned its own unique DMX address for colour and brightness.

Cable Management

A coiled cable from the lamp to ground level enables the stand height to be adjusted without detaching the cable from its hook at the base of the stand.